H600 diamond core drill rig
The Maqpower Superdrill H600 is a fully hydraulic, crawler-mounted diamond core drill rig for surface exploration drilling. Drillar has three units.
It drills with a wireline system from BQ to PQ and at angles from 30° to 90°. According to the manufacturer, it can also be fitted for top-hammer and down-the-hole (DTH) hammer drilling, and for cement grouting holes.
Technical specifications
| Manufacturer | Maqpower S.A.C. (Peru) |
|---|---|
| Type | Wireline diamond core drill, crawler-mounted |
| Depth capacity | BQ 1,200 m · NQ 900 m · HQ 600 m · PQ 400 m |
| Drilling angle | 30° to 90° |
| Engine | Cummins QSB 6.7, 220 hp at 2,200 rpm |
| Rotation unit | 4-speed gearbox: from 122 rpm at 5,300 N·m to 1,300 rpm at 497 N·m |
| Feed | 3.35 m stroke · 85.5 kN pull-down · 162.1 kN pullback |
| Wireline winch | 1,085 m of 1/4″ cable (1,800 m of 3/16″) |
| Main hoist | 72 kN line pull |
| Water pump | FMC 435, 130 L/min at 40 bar |
| Transport dimensions | 5.91 m long · 2.86 m wide · 2.86 m high |
| Height with vertical mast | 10.4 m |
| Weight | 11,000 kg |
Source: manufacturer’s operating manual.